服務熱線電話
400-6188-756
超聲波清洗設備選擇多少溫度合適?
來源:http://ckjy.net.cn/ 時間: 2022-10-07 瀏覽次數: 0
超聲波清洗設備選擇多少溫度合適?
How much temperature is appropriate for ultrasonic cleaning equipment?
超聲波清洗設備的清洗效果是非常顯著的,而且清洗效率又高,所以深受大家的青睞。使用超聲波清洗設備進行清洗的時候,我們應該注意選擇多少溫度合適。
The cleaning effect of ultrasonic cleaning equipment is very significant, and the cleaning efficiency is high, so it is favored by everyone. When using ultrasonic cleaning equipment for cleaning, we should pay attention to how much temperature is appropriate.
一般我們在清洗產品之前,先在清洗槽內加入清水,再加入清洗劑,然后開始按加熱鍵開始加熱,我們調整溫度為60度,60度溫度是超聲波和清洗劑發揮效果好的溫度。在這個溫度下空化效果好,清洗劑是溫度越高則作用越明顯,不過一般在使用清洗劑的時候,廠家都會有說明,采用60度的溫度,大部分活性酶是非?;钴S的,是污漬分解更高的溫度區間。所以如果需要除油污的話,千萬得選擇帶有溫度調節功能的超聲波清洗機。不管是除臘還是去油都是這個溫度剛剛好。就這像我們在家里洗碗一樣,用熱水洗碗和用冷水洗碗,效果是不一樣的。溫度過低,那么,空化效應也會很差,清洗效果也會受到影響。溫度在60度以后,但是如果溫度再次上升之后,空泡化內空氣壓力也會再次提升,會造成沖擊性增強降低,會造成一定的影響。
Generally, before cleaning the product, we first add clean water into the cleaning tank, then add the cleaning agent, and then press the heating button to start heating. We adjust the temperature to 60 ℃, which is the temperature at which ultrasound and cleaning agent work well. At this temperature, the cavitation effect is good. The higher the temperature, the more obvious the effect of the cleaning agent. However, when using the cleaning agent, the manufacturer will explain that most of the active enzymes are very active at a temperature of 60 ℃, which is a higher temperature range for stain decomposition. Therefore, if you need to remove oil stains, you must choose an ultrasonic cleaner with temperature regulation function. Whether wax removal or oil removal, the temperature is just right. Just like we wash dishes at home, the effect of washing dishes with hot water is different from that of washing dishes with cold water. If the temperature is too low, the cavitation effect will be poor and the cleaning effect will be affected. After the temperature is 60 ° C, however, if the temperature rises again, the air pressure in the cavitation will also rise again, which will result in an increase in the impact and a decrease in the impact, and will have a certain impact.
以上就是為大家介紹的有關通過式噴淋清洗機的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://ckjy.net.cn
The above is a detailed introduction to the through spray washer, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://ckjy.net.cn
上一篇:超聲波清洗機會使電子元件受損嗎
下一篇:全自動超聲波清洗機清洗
相關產品
相關文章
-
超聲波清洗和普通清洗有什么區別 2024-12-23
-
超聲波清洗機10大忌 2024-12-14
-
全自動超聲波清洗機需要定期維護嗎? 2024-12-13
-
高壓去毛刺清洗機的高壓水流介紹 2024-12-10
-
超聲波清洗機相關常見問題及解答 2024-12-07
-
分體式超聲波清洗機與普通的有什么區別? 2024-12-05
-
碳?xì)淝逑礄C(jī)對于環保工業的清晰要點 2024-12-03
-
噴淋清洗機:壓力過大怎么調整? 2024-11-25
-
通過式噴淋清洗機:為什么洗不干凈? 2024-11-22
-
高壓去毛刺清洗機:遇見故障莫慌張,依次排查按文章 2024-11-21