服務熱線電話
400-6188-756
單槽超聲波清洗機使用要注意什么?
來源:http://ckjy.net.cn/ 時間: 2022-04-22 瀏覽次數: 0
單槽超聲波清洗機是運用空化作用成倍或十幾售地提高清洗效果。當把液體放入清洗機內,施加后,由于超聲波在清洗液中是一種疏密相間,輻射傳播的高頻波,從而使液體高速往復振動。在振動的負壓區由于周圍的液體來不及補充,形成無數的微小真空氣泡,而在正壓區,微小氣泡在壓力下突然閉合,在閉合過程中由于液體間相互碰撞產生強大的沖擊波形成可達幾千個大氣壓的瞬時高壓,作用在被清洗的工件上。吸附在工件上的油膩、雜質在連續不斷的瞬時高壓作用下迅速脫離工件。從而達到清潔的目的。
Single tank ultrasonic cleaning machine uses cavitation to double or sell more than ten times to improve the cleaning effect. When the liquid is put into the cleaning machine and applied, the ultrasonic wave in the cleaning liquid is a high-frequency wave with density and radiation propagation, so that the liquid vibrates back and forth at high speed. In the negative pressure area of vibration, countless tiny vacuum bubbles are formed because the surrounding liquid has no time to supplement. In the positive pressure area, the tiny bubbles suddenly close under pressure. In the closing process, strong shock waves are generated due to the collision between liquids, forming an instantaneous high pressure of up to thousands of atmospheres, which acts on the cleaned workpiece. The greasy and impurities adsorbed on the workpiece quickly leave the workpiece under the action of continuous instantaneous high pressure. So as to achieve the purpose of cleaning.
單槽超聲波清洗機的使用方法:
Application method of single tank ultrasonic cleaning machine:
1.需要清洗的物品放入單槽清洗機的清洗籃中,然后將清洗籃放入清洗槽,不可將物品直接放入清洗槽里,避免損壞設備及清洗效果。
1. Put the articles to be cleaned into the cleaning basket of the single tank cleaning machine, and then put the cleaning basket into the cleaning tank. Do not put the articles directly into the cleaning tank to avoid damaging the equipment and cleaning effect.
2.根據不同的產品或者清洗效果,按比例倒入清洗液,水或者水溶液,水位低不得低于60mm,而高不得超過80mm。
2. According to different products or cleaning effects, pour cleaning solution, water or aqueous solution in proportion. The low water level shall not be less than 60mm and the high water level shall not exceed 80mm.
3.接入220V/50Hz電源三芯插座,接通電源。
3. Connect the 220V / 50Hz power three core socket and connect the power supply.
4.打開單槽超聲波清洗機開關按鈕,綠色開關亮顯示正常工作。
4. Turn on the switch button of single tank ultrasonic cleaning machine, and the green switch is on, indicating that it works normally.
5.按照物品的清洗要求,打開超聲波清洗機溫度控制進行溫度調節。
5. Turn on the temperature control of ultrasonic cleaning machine to adjust the temperature according to the cleaning requirements of articles.
以上就是全自動超聲波清洗機小編今天帶給大家的精彩內容了,更多的精彩內容請點擊進入我們的網站http://ckjy.net.cn
The above is the wonderful content brought to you by the small series of water automatic ultrasonic cleaning machine today. For more wonderful content, please click to enter our website http://ckjy.net.cn
上一篇:實驗室超聲波清洗儀器使用方法及步驟
下一篇:超聲波清洗機用什么水?
相關文章
-
超聲波清洗和普通清洗有什么區別 2024-12-23
-
超聲波清洗機10大忌 2024-12-14
-
全自動超聲波清洗機需要定期維護嗎? 2024-12-13
-
高壓去毛刺清洗機的高壓水流介紹 2024-12-10
-
超聲波清洗機相關常見問題及解答 2024-12-07
-
分體式超聲波清洗機與普通的有什么區別? 2024-12-05
-
碳氫清洗機對于環保工業的清晰要點 2024-12-03
-
噴淋清洗機:壓力過大怎么調整? 2024-11-25
-
通過式噴淋清洗機:為什么洗不干凈? 2024-11-22
-
高壓去毛刺清洗機:遇見故障莫慌張,依次排查按文章 2024-11-21